Perform fast calculations with our user-friendly online calculator! Conveniently crunch numbers and solve equations instantly. Ideal for quick math tasks, our tool simplifies your daily computations effortlessly. Try our intuitive calculator for accurate results on the go!
Use our crank arm length calculator to estimate bike crank size from leg or tibia length, convert units, and compare common crank sizes.
A bike should feel smooth and easy to ride. Crank arm length can affect how your legs move with each pedal stroke. The right size may help you feel more at ease on the bike.
Our crank arm length calculator helps you estimate a crank size from your leg or tibia length. It also compares your result with common crank sizes. You can enter your current crank length to see how the suggested size differs.
This tool gives an estimate. It does not replace a full bike fit. Comfort, riding style, and joint movement also matter.
The calculator has two methods. Each uses a set factor.
Crank length = Leg length in mm × 0.20
For this method, measure your inseam. The tool turns your value into millimeters before it works out the result.
Crank length = Tibia length in mm × 0.41
Use this method if you know your tibia length. The tibia is the larger bone in the lower leg.
The calculator accepts millimeters, centimeters, and inches.
1 cm = 10 mm
1 inch = 25.4 mm
For example, 80 cm equals 800 mm. The calculator uses the value in millimeters for both formulas.
Choose leg length or tibia length.
Pick the unit for your measurement.
Enter your leg or tibia length.
Add your current crank length if you want to compare it.
Select Calculate to view the result and closest crank sizes.
The tool checks your value before it runs the formula. Leg length must be from 400 to 1,300 mm. Tibia length must be from 250 to 600 mm. Your current crank length must be from 90 to 230 mm.
Say your inseam is 80 cm.
First, convert it to millimeters:
80 × 10 = 800 mm
Next, apply the leg length formula:
800 × 0.20 = 160 mm
Your calculated crank length is 160 mm. The tool then checks its size list. Since 160 mm is on that list, the closest size is 160 mm.
If your current crank is 175 mm, the size difference is:
160 − 175 = −15 mm
So, the suggested size is 15 mm shorter than your current crank.
Say your tibia length is 39 cm.
39 × 10 = 390 mm
390 × 0.41 = 159.9 mm
The exact result is 159.9 mm. The closest listed crank size is 160 mm.
The tool checks the result against these sizes: 140, 145, 150, 155, 160, 165, 167.5, 170, 172.5, 175, 177.5, and 180 mm.
It picks the size with the smallest gap from your result. If two sizes are equally close, it picks the shorter one. It also shows five close options, sorted from low to high.
The tool marks a result as outside its size range if it falls below 137.5 mm or above 182.5 mm. This flag does not stop the math. It tells you that the result sits beyond the range of the listed sizes.
The crank arm length calculator offers a quick way to estimate a crank size. Enter a valid leg or tibia measure, choose the right unit, and check the closest size. Use the result as a starting point. A bike fit can help you make the final choice.
It is the distance from the center of the bike's bottom bracket to the center of the pedal axle.
No. It gives an estimate based on the chosen body measure and factor. A bike fit may lead to a different choice.
Yes. The tool converts inches to millimeters using 25.4 mm per inch.
The exact result may not match a size you can buy. The tool checks its size list and picks the closest one.
The calculator still shows the math. It also flags the result, so you can review your measure and seek fit advice.